Difference between revisions of "Adding a module to Glimmer I"

From Interactive System for Ice sheet Simulation
Jump to: navigation, search
(Construct and add a new module to Glimmer)
(Construct and add a new module to Glimmer)
Line 3: Line 3:
  
 
*The new module will be used with velocities from the HO model to evolve a simple ice shelf domain (image below).
 
*The new module will be used with velocities from the HO model to evolve a simple ice shelf domain (image below).
 
  
 
*For step-by-step notes on adding this module, go to [[adding dH/dt module]].
 
*For step-by-step notes on adding this module, go to [[adding dH/dt module]].

Revision as of 13:02, 5 August 2009

Construct and add a new module to Glimmer

  • For this exercise, we will create and add a 1st-order, upwind advection scheme to the model
  • The new module will be used with velocities from the HO model to evolve a simple ice shelf domain (image below).




Initial thickness, across-flow, and along-flow velocity fields for confined ice shelf (500 m thick, uniform T=253 K). Boundary conditions are 0-flux at top, left, right, and shelf BCs at bottom.

Confined-shelf.ini.jpg



Thickness and velocity fields after 100 yrs of evolution with no accumulation. Evolution was calculated using the 1st-order advection scheme.

Confined-shelf.100a no acab.jpg



Steady state thickness and velocity fields with uniform accumulation of 0.5 m/a. Evolution was calculated using the 1st-order advection scheme.

Confined-shelf.100a 5 acab ss.jpg