Difference between revisions of "Default configuration files for ISMIP-HOM test"

From Interactive System for Ice sheet Simulation
Jump to: navigation, search
(New page: ==Default configuration file for test A== Copy this text, paste it into a new text file, and save it as '''ishom.a.config''' <source lang=fortran>[ISMIP-HOM-A] temperature = -30. 1.67e-5 ...)
 
Line 1: Line 1:
==Default configuration file for test A==
+
==Configuration file for test A==
Copy this text, paste it into a new text file, and save it as '''ishom.a.config'''
+
Copy this text, paste it into a new text file, and save it as '''ishom.a.config'''. The horizontal grid spacing here is for the 160km domain length.
  
 
<source lang=fortran>[ISMIP-HOM-A]
 
<source lang=fortran>[ISMIP-HOM-A]
Line 56: Line 56:
 
[CF input]
 
[CF input]
 
name = ishom.a.nc
 
name = ishom.a.nc
 +
time = 1
 +
</source>
 +
 +
 +
==Configuration file for test C==
 +
Copy this text, paste it into a new text file, and save it as '''ishom.c.config'''. The horizontal grid spacing here is for the 160km domain length.
 +
 +
<source lang=fortran>ISMIP-HOM-A]
 +
temperature = -30. 1.67e-5
 +
 +
[parameters]
 +
geothermal = -42e-3
 +
flow_factor = 1
 +
 +
[CF output]
 +
variables = thk btemp temp uvel vvel wvel uvelhom vvelhom wgrd acab diffu uvelhom_srf uvelhom_bas vvelhom_srf vvelhom_bas tau_xz tau_yz
 +
frequency = 1
 +
name = ishom.c.out.nc
 +
 +
[grid]
 +
upn = 11
 +
ewn = 51
 +
nsn = 51
 +
dew = 3200
 +
dns = 3200
 +
sigma_builtin = 1
 +
 +
[time]
 +
niso = 1.
 +
tend = 200010.
 +
ntem = 1.
 +
tstart = 200000.
 +
dt = 1.
 +
nvel = 1.
 +
 +
[CF default]
 +
comment = forced upper kinematic BC
 +
title = EISMINT-2 Exp B
 +
 +
[options]
 +
flow_law = 2
 +
evolution = 0
 +
temperature = 1
 +
vertical_integration = 1
 +
sliding_law = 4
 +
marine_margin = 2
 +
stress_calc = 2
 +
hotstart = 1
 +
basal_water = 0
 +
isostasy = 0
 +
periodic_ew = 1
 +
periodic_ns = 1
 +
diagnostic_run = 1
 +
 +
[ho_options]
 +
diagnostic_scheme = 3
 +
prognostic_scheme = 0
 +
basal_stress_input = 3
 +
which_ho_sparse_fallback=2 #Use UMFPACK if BiCG fails
 +
which_ho_babc = 9
 +
 +
[CF input]
 +
name = ishom.c.nc
 
time = 1
 
time = 1
 
</source>
 
</source>

Revision as of 23:43, 4 August 2009

Configuration file for test A

Copy this text, paste it into a new text file, and save it as ishom.a.config. The horizontal grid spacing here is for the 160km domain length.

[ISMIP-HOM-A]
temperature = -30. 1.67e-5
 
[parameters]
geothermal = -42e-3
flow_factor = 1
 
[CF output]
variables = thk btemp temp uvel vvel wvel uvelhom vvelhom wgrd acab diffu uvelhom_srf uvelhom_bas vvelhom_srf vvelhom_bas tau_xz tau_yz
frequency = 1
name = ishom.a.out.nc
 
[grid]
upn = 11
ewn = 51
nsn = 51
dew = 3200
dns = 3200
sigma_builtin = 1
 
[time]
niso = 1.
tend = 200001.
ntem = 1.
tstart = 200000.
dt = 1.
nvel = 1.
 
[CF default]
comment = forced upper kinematic BC
title = EISMINT-2 Exp B
 
[options]
flow_law = 2
evolution = 0
temperature = 1
vertical_integration = 1
sliding_law = 4
marine_margin = 2
stress_calc = 2
hotstart = 1
basal_water = 0
isostasy = 0
periodic_ew = 1
periodic_ns = 1
diagnostic_run = 1
 
[ho_options]
diagnostic_scheme = 3
prognostic_scheme = 0
which_ho_babc = 8
 
[CF input]
name = ishom.a.nc
time = 1


Configuration file for test C

Copy this text, paste it into a new text file, and save it as ishom.c.config. The horizontal grid spacing here is for the 160km domain length.

ISMIP-HOM-A]
temperature = -30. 1.67e-5
 
[parameters]
geothermal = -42e-3
flow_factor = 1
 
[CF output]
variables = thk btemp temp uvel vvel wvel uvelhom vvelhom wgrd acab diffu uvelhom_srf uvelhom_bas vvelhom_srf vvelhom_bas tau_xz tau_yz
frequency = 1
name = ishom.c.out.nc
 
[grid]
upn = 11
ewn = 51
nsn = 51
dew = 3200
dns = 3200
sigma_builtin = 1
 
[time]
niso = 1.
tend = 200010.
ntem = 1.
tstart = 200000.
dt = 1.
nvel = 1.
 
[CF default]
comment = forced upper kinematic BC
title = EISMINT-2 Exp B
 
[options]
flow_law = 2
evolution = 0
temperature = 1
vertical_integration = 1
sliding_law = 4
marine_margin = 2
stress_calc = 2
hotstart = 1
basal_water = 0
isostasy = 0
periodic_ew = 1
periodic_ns = 1
diagnostic_run = 1
 
[ho_options]
diagnostic_scheme = 3
prognostic_scheme = 0
basal_stress_input = 3
which_ho_sparse_fallback=2 #Use UMFPACK if BiCG fails
which_ho_babc = 9
 
[CF input]
name = ishom.c.nc
time = 1